About TrendForce News

TrendForce News operates independently from our research team, curating key semiconductor and tech updates to support timely, informed decisions.

[News] JEDEC Previews Preliminary DDR6 Specs, Targeting Over 50% Higher Bandwidth and 12.8 GT/s Speeds


2026-11-19 Semiconductors editor

JEDEC has unveiled preliminary specifications for its next-generation DDR6 DRAM standard, targeting higher bandwidth, capacity, power efficiency, and reliability to meet growing demand from AI, cloud computing, data centers, servers, and client devices. According to JEDEC, DDR6 is expected to deliver over 50% higher memory bandwidth at introduction through faster data rates and a wider data bus, with further gains planned as speeds increase.

Specifically, DDR6 RDIMMs are expected to start at 12.8 GT/s, up from DDR5’s 9.2 GT/s, with a roadmap extending to 14.4 GT/s and beyond. The standard will also expand the data bus width from 64 to 96 data lines, representing a 50% increase. Alongside these improvements, DDR6 will introduce a new memory architecture organized around pseudo-channels. The design aims to increase bandwidth per DRAM package while allowing more flexible memory configurations to support system reliability and more efficient data movement.

DDR6 Targets Higher Memory Density, Improved Power Efficiency and Compact Modules

Beyond bandwidth improvements, DDR6 is designed to support greater memory capacity, with planned support for DRAM die densities of up to 128Gb. Optimizations for die stacking are also expected to increase memory density within each package. At the module level, JEDEC is targeting a more compact 74mm design, significantly shorter than DDR5’s 133mm module length. The smaller footprint is intended to help systems accommodate higher memory density.

Power efficiency is another focus of DDR6 development. JEDEC aims to improve performance per watt compared with DDR5 through the adoption of VSS-terminated I/O and low-power operating modes designed for data center applications. Meanwhile, DDR6 is being developed to support multiple module form factors, potentially including RDIMM, UDIMM, and CAMM. This flexibility is intended to address different computing requirements.

Memory Makers Begin Early DDR6 Development

Major memory manufacturers have already begun early preparations for commercialization. According to a May report by The Elec, citing industry sources, Samsung Electronics, SK hynix, and Micron have asked substrate suppliers to begin preliminary development based on initial design specifications. The suppliers are developing substrates that account for memory thickness, stack-up structures, and wiring, with early prototypes undergoing testing and validation.

As The Elec notes, DDR6’s higher data rates present greater challenges for signal integrity and power efficiency, prompting closer collaboration between memory manufacturers and substrate suppliers from the early design stages. Industry sources expect DDR6 commercialization to begin in 2028–2029 or later, although mass production will depend on end-customer demand.

Read more

(Photo credit: Samsung)

Please note that this article cites information from JEDEC and The Elec.



Get in touch with us